Sage Journals: Discover world-class research

Free access

Review article

First published 1996-10

Rotational Moulding of Liquid Polymers

E Harkin-Jones, R J Crawford

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2015-10

Void distributions and permeability prediction for rotationally moulded polymers

BR Murray, SB Leen, CM Ó Brádaigh

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2007-12

Release characteristics of polymer surface when moulding polyurethane foam

C. E. Majewski, N. Hopkinson

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 1995-10

Towards Intelligent Process Control of Injection Moulding of Polymers

P D Coates, R G Speight

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Review article

First published 2023-4

A review of polymers,fibre additives and fibre treatment techniques used in rotational moulding processing

Prashant Khanna, PL Ramkumar, Nikita Gupta

High Performance Polymers

Free access

Research article

First published 1998-8

Application of the Taguchi method for consistent polymer melt production in injection moulding

N Khoshooee, P D Coates

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-7

Isolation of hydrodynamic parameters for the fibre length attrition in injection-moulded short-fibre polymer composites

María P Ruiz, António J V Pontes, Leandro N Ludueña

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2013-8

Thermally conductive polymer compounds for injection moulding: The synergetic effect of hexagonal boron-nitride and talc

JG Kovacs, A Suplicz

Journal of Reinforced Plastics and Composites

Free access

Research article

First published 2008-1

Large-area polymer microstructure replications through the hot embossing process using modular moulding tools

C Mehne, R Steger, P Koltay [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2007-12

Advances in infrared technology for the online monitoring of injection moulding: application to the understanding of the nature of contact at the polymer—mould interface

A. Bendada, A. Derdouri, Y. Simard [...]

Transactions of the Institute of Measurement and Control

Search results