Sage Journals: Discover world-class research

Free access

Research article

First published 1995-10

Towards Intelligent Process Control of Injection Moulding of Polymers

P D Coates, R G Speight

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 1998-8

Application of the Taguchi method for consistent polymer melt production in injection moulding

N Khoshooee, P D Coates

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-7

Isolation of hydrodynamic parameters for the fibre length attrition in injection-moulded short-fibre polymer composites

María P Ruiz, António J V Pontes, Leandro N Ludueña

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2013-8

Thermally conductive polymer compounds for injection moulding: The synergetic effect of hexagonal boron-nitride and talc

JG Kovacs, A Suplicz

Journal of Reinforced Plastics and Composites

Free access

Research article

First published 2003-5

Calculating cooling times for polymer injection moulding

K A Stelson

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2007-12

Advances in infrared technology for the online monitoring of injection moulding: application to the understanding of the nature of contact at the polymer—mould interface

A. Bendada, A. Derdouri, Y. Simard [...]

Transactions of the Institute of Measurement and Control

Retricted access

Research article

First published 2000-1

In process monitoring of polymer batch to batch variation in injection moulding

A.L. Kelly, M. Woodhead, R.M. Rose [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 1998-07

Simulation and Analysis of Three-Dimensional Polymer Flow in Injection Moulding

Jurgen Zachert, Walter Michaeli

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2009-6

Efficiency of injection-moulded polymer composite spur gears

S Senthilvelan, R Gnanamoorthy

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2007-5

Analysis of Back Injecting Real Wood Veneers using Engineering Polymers in an Injection Moulding Process

K. Makenji, V. Goodship, R. Fanning [...]

Progress in Rubber,Plastics and Recycling Technology

Search results