Sage Journals: Discover world-class research

Retricted access

Review article

First published 2019-4

Feasibility study of a turbocharger rotor supported by air foil bearings with diameter of 17 mm focusing on rotordynamic performance

Jiajia Yan, Zhansheng Liu, Guanghui Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2020-7

Influence of geometric parameters on the bump foil bearing performance

Sadanand Kulkarni, Soumendu Jana

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2022-1

Feasibility investigation of a compressor rotor supported by gas foil bearings with inhomogeneous bump foils

Hao Li, Haipeng Geng, Bo Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2013-12

Numerical and experimental study of cavitating flow through an axial inducer considering tip clearance

Rafael Campos-Amezcua, Sofiane Khelladi, Zdzislaw Mazur-Czerwiec [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2008-1

Capillary filling process during ultrasonically brazing of aluminium matrix composites

W. W. Zhao, J. C. Yan, W. Yang [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 1980-6

A Theory of Contact Loss at Resolute Joints with Clearance

R. S. Haines

Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2017-2

Design and evaluation of rotor clearances for oil-injected screw compressors

David Buckney, Ahmed Kovacevic, Nikola Stosic

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2020-9

Analysis on dynamical properties of the foil bearing rotor system with the unbalanced magnetic pull

Hao Li, Haipeng Geng, Hao Lin [...]

International Journal of Applied Electromagnetics and Mechanics

Retricted access

Other

First published 1966-6

Effect of Offset Tolerance on Motion Characteristics of Reciprocating Cam-Followers

R. G. Fenton

Proceedings of the Institution of Mechanical Engineers

Retricted access

Research article

First published 2014-9

An Ergonomic Evaluation of the Extravehicular Mobility Unit (EMU) Spacesuit Hard Upper Torso (HUT) Size Effect on Mobility,Strength,and Metabolic Performance

Christopher R. Reid, Lauren R. Harvill, Jason R. Norcross [...]

Proceedings of the Human Factors and Ergonomics Society Annual Meeting

Search results