Sage Journals: Discover world-class research

Free access

Research article

First published 2002-12

The application of U-shape milled grooves for cooling of injection moulds

Y F Sun, K S Lee, A Y C Nee

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2007-4

Optimisation of continuous and pulsed cooling in injection moulding processes

A. G. Smith, L. C. Wrobel, B. A. McCalla [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2003-5

Calculating cooling times for polymer injection moulding

K A Stelson

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2010-4

Mould cooling simulation for injection moulding using a fast boundary element method approach

H Zhou, Y Zhang, J Wen [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2004-8

Experimental investigation and numerical simulation of cooling process in water assisted injection moulded parts

S.-J. Liu, W.-K. Chen

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2002-7

Three-dimensional optimum design of the cooling lines of injection moulds based on boundary element design sensitivity analysis

H Zhou, D Li, S Cui

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2007-2

Evaluation of heat management in injection mould tools

B. A. McCalla, P. S. Allan, P. R. Hornsby

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2008-12

Integrated filling,packing and cooling CAE analysis of powder injection moulding parts

S. Ahn, S. T. Chung, S. V. Atre [...]

Powder Metallurgy

Retricted access

Research article

First published 2021-4

Optimising open and closed cooling time for hybrid injection moulding of polypropylene with polyamide inserts from multi jet fusion

Ellen Fernandez, Ruben Vande Ryse, Leonardo Cavicchiolo [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2001-10

Manufacture of production injection mould tooling incorporating conformal cooling channels via indirect selective laser sintering

K W Dalgarno, T D Stewart

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results