Sage Journals: Discover world-class research

Retricted access

Research article

First published 2014-10

A new measure of inaccuracy with its application to multi-criteria decision making under intuitionistic fuzzy environment

Rajkumar Verma, Bhu Dev Sharma

Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology

Retricted access

Research article

First published 2005-05

Inaccuracy of Stated Versus Measured Parental Heights

Jonathan E. Teitelbaum, Susan Koreen, Kimberly Hightower [...]

Clinical Pediatrics

Retricted access

Research article

First published 1964-6

Paper 13: The Sensitivity of an Optimal System to Measurement Inaccuracies

J. M. C. Clark

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Retricted access

Research article

First published 1969-12

The Calculation of Overall Inaccuracies for a Gas Flow Measurement System

S. R. Freeman

Measurement and Control

Retricted access

Research article

First published 1987-1

Influence of experimental inaccuracies on corrosion rates and Tafel slopes determined from electrochemical measurements in different overpotential ranges

W. Skinner

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Free access

Research article

First published 2004-1

Machine tool errors caused by optical linear encoders

I Alejandre, M Artes

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1992-12

The Fit of Gold-alloy Full-crown Castings Made with Pre-wetted Casting Ring Liners

E.F. Morey, R. Earnshaw

Journal of Dental Research

Free access

Research article

First published 2000-4

The calibration of ultrasound transducers used to monitor motion of the residual femur within a transfemoral socket during gait

K. D. Murray, P. Convery

Prosthetics and Orthotics International

Free access

Research article

First published 1997-12

Calibration problems encountered while monitoring stump/socket interface pressures with force sensing resistors: Techniques adopted to minimise inaccuracies

A. W. P. Buis, P. Convery

Prosthetics and Orthotics International

Retricted access

Research article

First published 1947-6

The Measurement of Errors in Gears for Turbine Reduction Drives

C. Timms

Proceedings of the Institution of Mechanical Engineers

Search results