Sage Journals: Discover world-class research

Retricted access

Research article

First published 2008-2

Limit loads for thin‐walled piping branch junctions under combined pressure and in‐plane bending

Y‐J Kim, K‐H Lee, C‐Y Park

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 1994-2

Plastic Loads for Piping Branch Junctions Subjected to Combined Pressure and In-Plane Moment Loads

M G Kirkwood, D G Moffat

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2022-1

Bending deflection and stress analyses in a thin functionally graded material skew plate with different boundary conditions on the Winkler–Pasternak elastic foundation and under combined in-plane and uniform lateral loads using the extended Kantorovich method

Ahmad Mamandi

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1973-10

Large Deflections of Rectangular Orthotropic Plates under Combined Transverse and In-Plane Loads

M. K. Prabhakara, C. Y. Chia

Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1994-08

Energy Release Rate Determination for Edge Delamination under Combined in-Plane,Bending and Hygrothermal Loading. Part II-Two Symmetrically Located Delaminations

B. D. Davidson

Journal of Composite Materials

Retricted access

Research article

First published 2012-1

Plastic limit loads for piping branch junctions under out-of-plane bending

Kuk-Hee Lee, Yinghu Xu, Jun-Young Jeon [...]

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 1994-06

Energy Release Rate Determination for Edge Delamination under Combined In-Plane,Bending and Hygrothermal Loading. Part I-Delamination at a Single Interface

B. D. Davidson

Journal of Composite Materials

Retricted access

Research article

First published 1974-4

Plane-Stress yielding of cantilevers in bending due to combined shear and axial load

W Johnson, N R Chitkara, A S Ranshi

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 1998-7

Ultimate strength of a double-tee tubular joint subjected to combined chord compression and brace out-of-plane bending

C T Kang, D G Moffat, J Mistry

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2014-12

Fiber nonlinear predictive model for combined bending-compression loading of an orthogonal plane weave composite laminate structure

Siming Guo, Matthieu Gresil, Michael Sutton [...]

Journal of Composite Materials

Search results