Sage Journals: Discover world-class research

Retricted access

Research article

First published 2022-3

The role of vibration and pass number on microstructure and mechanical properties of AZ91/SiC composite layer during friction stir processing

Behrouz Bagheri, Amin Abdollahzadeh, Farzaneh Sharifi [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025

Calculation method of contact index between loop yarn and abrasive

Li Yong, Zhou Yuyang, Li Jian [...]

Textile Research Journal

Retricted access

Research article

First published 2023-10

Heat transfer analysis of triple concentric tube heat exchanger using MWCNT/water nanofluids under parallel flow configurations

V Hariprasath, PC Mukesh Kumar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2014-4

Two-phase pressure drop due to friction in micro-channel

Tae-Woo Lim, Sam-Sang You, Jong-Su Kim [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-12

Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN

Jatoth Heeraman, Ravinder Kumar, Prem Kumar Chaurasiya [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2005-8

Experimental investigation of fluid flow in long rectangular micro-channels

R Rathnasamy, J H Arakeri, K Srinivasan

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2024

Development of ANN prediction model for estimation of heat transfer utilizing rectangular-toothed v-cut twisted tape

Sanjay Kumar Singh, Ruchin Kacker, Satyam Shivam Gautam [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2024-12

Investigations of the effect of circular perforations and V-cut on SLTT in DPHE: An experimental analysis using IoT approach

Manoj Kumar Diwaker, Arvind Kumar

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-12

Application of artificial intelligence to investigate the performance and flow pattern near staggered piece in V-ribs with aligned gaps roughness in solar air heater using relevant input parameters

Piyush Kumar Jain, Prem Kumar Chaurasiya, Upendra Rajak [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Open access

Research article

First published 2022-9

Impact of secondary flow on the single-phase flow in spiral microchannels: An experimental study

Lingjian Kong, Guangzhe Liu

Advances in Mechanical Engineering

Search results