Objective

To design a new open-end intracranial hematoma drainage tube for clinical application.

Methods

The newly developed device consists of two parts: the plunger and barrel. On one side, the barrel is bullet shaped with an opening tip. The plunger is located in the middle cavity of the tube barrel and extended out at the open-end. It was designed for strengthening the tube barrel and for convenience in performing the drainage procedure. It can be used by inserting the drainage tube into the lesion and pulling out the plunger, whereby blood will forcefully rise up inside the barrel, providing a satisfactory outcome. It is made for effusion drainage purposes. During the procedure, the drainage tip is placed at the deepest part of the intracranial hematoma to completely drain the blood. Moreover, the plunger fits tightly in the tube, preventing leakage during the operation. With the use of the device, brain can be separated. In addition, the device can help reduce the risk of cerebral damage because of the small operating area. The barrel sidewall has matching opening holes bilaterally and equally for exchanging substances between the inner and outer parts. The overlapping ratio in each horizontal pair is around 1/3–1/2. Each pair on the opposite side will form a different pressure. Thus, the opening holes will not easily get blocked with blood clot.

Results

Blood and accumulated liquid from the deepest part of the intracranial hematoma can be directly drawn through the drainage tube without damaging a large area. The tube does not get blocked easily and allows for complete removal of the hematoma.

Conclusions

The device is asuitable instrument for clinical application.

Search results

A Newly Developed Open-End Intracranial Hematoma Drainage Tube