Sage Journals: Discover world-class research

Retricted access

Research article

First published 2026

Methods for tool geometric parameter and tool path planning in rough milling axial-flow surface parts

Yang Liu, Yuwen Sun

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

Research on optimizing the spatial arrangement of inserts for screw rotor disk milling cutters

Junrui Hu, Jian Yang, Rujia Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 1998-5

Computer aided design of cutters for helicoidal surfaces

K P Karunakaran, S G Dhande

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2021-8

Identification of eccentricity for disc milling cutter of indexable two sided inserts

Gensheng Li, Chao Xian, Hongmin Xin

Advances in Mechanical Engineering

Retricted access

Research article

First published 2023-9

Determination of force coefficient based on instantaneous forces and linear mechanistic model in ball end milling

Mithilesh K. Dikshit

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Other

First published 2006-4

Influence of ion bombardment on structure and tribological performance of nanoscale multilayer C/Cr PVD coatings

Y. N. Kok, J. G. Wen, I. Petrov [...]

Surface Engineering

Free access

Research article

First published 2007-4

Some considerations on tool wear and workpiece surface quality of holes finished by reaming or milling in a nickel base superalloy

D A Axinte, P Andrews

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results

Methods for tool geometric parameter and tool path planning in rough milling axial-flow surface parts

Research on optimizing the spatial arrangement of inserts for screw rotor disk milling cutters

Computer aided design of cutters for helicoidal surfaces

Identification of eccentricity for disc milling cutter of indexable two sided inserts

Determination of force coefficient based on instantaneous forces and linear mechanistic model in ball end milling

Influence of ion bombardment on structure and tribological performance of nanoscale multilayer C/Cr PVD coatings

Some considerations on tool wear and workpiece surface quality of holes finished by reaming or milling in a nickel base superalloy