Sage Journals: Discover world-class research

Retricted access

Research article

First published 2015-11

Performance comparison between a conventional helicopter and compound helicopter configurations

Kevin Ferguson, Douglas Thomson

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2013-12

Clinical Outcomes After Crossed-Limb vs. Conventional Endograft Configuration in Endovascular AAA Repair

George S. Georgiadis, Efstratios I. Georgakarakos, George A. Antoniou [...]

Journal of Endovascular Therapy

Retricted access

Research article

First published 2025

Enhancing co-cure joint performance using GPTMS-modified stainless steel mesh reinforcement: Interleaved versus conventional configurations

Sekar Balaji, Murugan Rajesh, Thulasidhas Dhilipkumar [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2018-9

Multi-objective optimization of stacked radial passive magnetic bearing

KP Lijesh, Mrityunjay Doddamani, SI Bekinal [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2018-1

Modeling and simulation of an eight-bit auto-configurable successive approximation register analog-to-digital converter for cardiac and neural implants

Suhaib Ahmed, Vipan Kakkar

SIMULATION

Open access

Research article

First published 2021-06-02

Comparative evaluation of ballet-type and conventional stent graft configurations for endovascular aneurysm repair: A CFD analysis

Fahmida Ashraf, Tehmina Ambreen, Cheol Woo Park [...]

Clinical Hemorheology and Microcirculation

Retricted access

Research article

First published 2014-3

Theoretical analysis and the morphology control of vertical phase segregation in high-efficiency polymer/fullerene solar cells

Bowen Gao

High Performance Polymers

Retricted access

Research article

First published 2025-4

Numerical investigation of nanoparticles dispersion on forced / mixed convective flows and heat transfer in a lid-driven stepped cavity configurations

Purohitam Narasimha Siva Teja, Santhosh Kumar Gugulothu, Puchalapalli Dinesh Sankar Reddy [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2025

Numerical study of dephosphorisation kinetics for different bottom tuyere configuration for combined blowing converters with a single-flow post-combustion oxygen lance

Chao Liu, Shu-guo Zheng, Miao-yong Zhu

Ironmaking & Steelmaking: Processes,Products and Applications

Retricted access

Research article

First published 2008-8

Numerical simulation for optimal configuration of heater and cooler locations with natural convection inside a square enclosure and the effect of radiation in the presence of radiatively active medium

S K Mahapatra

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results