Sage Journals: Discover world-class research

Retricted access

Review article

First published 2023-9

Predictions of friction and temperature at marine cam-tappet interface based on mixed lubrication analysis with real surface roughness

Deliang Hua, Renze Li, Xiujiang Shi [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024-12

Effect of micro-surface-texturing on the friction between cam/tappet interface of a commercial vehicle engine

Muhammad Rizwan Siddiqui, Mian Ashfaq Ali, Riaz Ahmed Mufti [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2004-9

Combined multi-body dynamics and experimental investigation for determination of the cam-flat tappet contact condition

M Teodorescu, D Taraza

Proceedings of the Institution of Mechanical Engineers,Part K: Journal of Multi-body Dynamics

Retricted access

Research article

First published 2014-2

Mixed thermo-elastohydrodynamic cam–tappet power loss in low-speed emission cycles

WWF Chong, M Teodorescu, H Rahnejat

International Journal of Engine Research

Retricted access

Research article

First published 1967-9

Report 21: Simultaneous Measurement of Load,Friction,and Film Thickness in a Cam-And-Tappet System

J.-P. Vichard, M. R. Godet

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Retricted access

Research article

First published 2017-2

Numerical simulation of the effects of coating on thermal elastohydrodynamic lubrication in cam/tappet contact

Changya Yu, Xianghui Meng, Youbai Xie

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024-6

Modeling and analysis of 3D mixed lubrication in marine cam–tappet pair

Deliang Hua, Xiujiang Shi, Wen Sun [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 1960-1

Application of the Flash Temperature Concept to Cam and Tappet Wear Problems

A. Dyson, H. Naylor

Proceedings of the Institution of Mechanical Engineers: Automobile Division

Retricted access

Research article

First published 2005-3

Elastodynamic transient analysis of a four-cylinder valvetrain system with camshaft flexibility

M Teodorescu, M Kushwaha, H Rahnejat [...]

Proceedings of the Institution of Mechanical Engineers,Part K: Journal of Multi-body Dynamics

Retricted access

Research article

First published 1998-4

Gasoline engine valve train design evolution and the antiwear requirements of motor oils

J. C. Bell

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results