Sage Journals: Discover world-class research

Retricted access

Research article

First published 2018-12

To study the effect of stress magnitude and tool geometry on the calibration coefficients: Ring core technique

Anoj Giri, Chandan Pandey, Manas M Mahapatra

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2016

Calibration of Pavement Rutting Prediction in Colorado Using Layer-Specific Rutting Model Coefficients for Hot-Mix Asphalt in AASHTOWare Pavement ME Design

Biplab B. Bhattacharya, Jagannath Mallela, Leslie Titus-Glover [...]

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 2013-8

The Fractal Analysis of Architecture: Calibrating the Box-Counting Method Using Scaling Coefficient and Grid Disposition Variables

Michael J Ostwald

Environment and Planning B: Urban Analytics and City Science

Retricted access

Research article

First published 2019-1

Calibration for gimbaled platform inertial navigation system on centrifuge

Yong-fei Xu, Shi-feng Zhang

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Free access

Research article

First published 2007-6

New algorithm for calibration of instantaneous cutting-force coefficients and radial run-out parameters in flat end milling

M Wan, W H Zhang, G Tan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2008-6

Consistency study on three cutting force modelling methods for peripheral milling

M Wan, W H Zhang, G H Qin [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2003-6

Re-Calibrating Kubelka—Munk: Which Absorption Coefficient?

Donald J. Dahm

NIR news

Free access

Research article

First published 2011-2

Error analysis of the cutting coefficients and optimization of calibration procedure for cutting force prediction

I H Ahn, J H Hwang, W C Choi

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2019-1

Measuring residual stress in finite thickness plates using the hole-drilling method

Marco Beghini, Leonardo Bertini, Anoj Giri [...]

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 1995-12

Determination and Use of Secondary Infrared Intensity Standards

John E. Bertie, Shuliang L. Zhang, R. Norman Jones [...]

Applied Spectroscopy

Search results