Sage Journals: Discover world-class research

Retricted access

Research article

First published 2009-5

Effects of CFRP laminate thickness on bending after impact strength

S. Nilsson, A. Bredberg, L. E. Asp

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2017-9

Analysis of composite stiffener under successive impact and bending test

Muhammad Ridha, Tong-Earn Tay, Sven Werner [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 1998-01

Study of Impact Damage of Composite Laminates Using Five-Point Bending

Mark E. Robeson

Journal of Reinforced Plastics and Composites

Open access

Research article

First published 2020-2

Residual bending behaviour of sandwich composites after impact

Ismet Baran, Wouter Weijermars

Journal of Sandwich Structures & Materials

Retricted access

Research article

First published 2011-8

An experimental study on the behavior of PP/EPDM/JUTE composites in impact,tensile and bending loadings

S.M.R. Khalili, R. Eslami Farsani, S. Rafiezadeh

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2025-3

The response of double press double sintered (DPDS) Al/CNT nanocomposites against wear,impact,and bending

Akbar Yarahmadi, Hamidreza Mohammadian Semnani, Hassan Abdoos

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2020-1

Experimental analysis of composite scarf adhesive joints modified with multiwalled carbon nanotubes under bending and thermomechanical impact loads

UA Khashaba, Ramzi Othman, IMR Najjar

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2020-5

The response of pin-clamped carbon fibre-reinforced plastics composite sandwich beams with polyvinylchloride foam core under bending impact

Umut Caliskan, M Kemal Apalak

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2022-11

Numerical prediction of mechanical behavior of acrylonitrile-butadiene-styrene under three-point bending and impact loadings by Anand–Gurtin material model

Mehmet Akif Dundar, Gurpinder Singh Dhaliwal, Mirali Nuraliyev [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2014-8

Permanent indentation characterization for low-velocity impact modelling using three-point bending test

Natthawat Hongkarnjanakul, Samuel Rivallant, Christophe Bouvet [...]

Journal of Composite Materials

Search results