Sage Journals: Discover world-class research

Retricted access

Research article

First published 2020-8

Dynamic stability and bifurcation phenomena of an axially loaded flexible shaft-disk system supported by flexible bearing

Hanmant P Phadatare, Barun Pratiher

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2010

Interpretation Criteria to Evaluate Resistance Factors for Axial Load Capacity of Drilled Shafts

Murad Y. Abu-Farsakh, Xinbao Yu

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 2013-4

On the effects of non-homogeneous materials on the vibrations and static stability of tapered shafts

Arnaldo J Mazzei, Richard A Scott

Journal of Vibration and Control

Retricted access

Research article

First published 2024-11

Influence of axial clearance on load distribution in double supported tapered roller bearings of wind turbine main shaft

Yanwei Yuan, Jianmei Wang, Lu Ren [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2007-11

Interfacial parameter analyses for sleeve-pin-shaft connections under axial and torsional cyclic loading using the finite element method

Y-M Jen, C-L Wei

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2005-1

Finite element analysis of shafts under combined loads

W S Robotham, Y S Hong, T H Hyde [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2013-10

Finite element prediction of fatigue crack growth in Super CMV hollow shafts with transverse holes under combined torsional and axial loading

Ran Li, Thomas H Hyde, Wei Sun

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2023-8

Evaluation and optimization of meshless methods to estimation of the 3D-stress intensity factors in mode I–III for fatigue life prediction cracked shaft under uni and multi-axial cyclic loading

Behrooz Ariannezhad, Shahram Shahrooi, Mohammad Shishehsaz

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2018-7

Aspects of stress in optimal shaft shoulder fillet

Niels Leergaard Pedersen

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2000-2

Optimum initial axial compression due to preload in an arrangement of two tapered roller bearings Part 1: Analysis

I Bercea, D Nélias, S Cretu

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results