Sage Journals: Discover world-class research

Retricted access

Research article

First published 2025-4

A heating control mode for the hybrid passive thermosiphon beam

Lingzhi Li, Mengmeng Li, Danmeng Jiang [...]

Indoor and Built Environment

Retricted access

Research article

First published 2023-3

Effect of K-wire Reuse and Drill Mode on Heat Generation in Bone

Muturi G. Muriuki, Arun K. Reddy, Alex Tauchen [...]

HAND

Retricted access

Research article

First published 2004-3

Rheometers in scanning mode for cure of rubbers with low enthalpy: effect of heating rate and rubber–die contact

I.D. Rosca, R. Granger, J.M. Vergnaud

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2021-6

Effect of isothermal heat treatment on crystallinity,tensile strength and failure mode of CF/PPS laminate

Yankuan Liu, Xuelin Zhou, Zhiping Wang

High Performance Polymers

Retricted access

Research article

First published 2006-3

Improving reliability of heat and fluid flow calculation during conduction mode laser spot welding by multivariable optimisation

A. De, T. DebRoy

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2019-6

Effects of a flow mode transition on natural convection heat transfer in a heat tracing enclosure

CJ Ho, GN Sou, CM Lai

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2019-1

Heat flux measurement analysis from thin film gauge in convective heat transfer mode

Tanweer Alam, Rakesh Kumar

Transactions of the Institute of Measurement and Control

Retricted access

Research article

First published 2024-6

Correlation of thermal environments with the bacterial concentration in bedrooms with intermittent and continuous heating modes

Bingyang Shen, Meng Liu, Lumeng Liu [...]

Indoor and Built Environment

Retricted access

Research article

First published 1996-1

The Efficiency at Maximum Power Output of Endoreversible Engines under Combined Heat Transfer Modes

F. Moukalled

International Journal of Mechanical Engineering Education

Retricted access

Research article

First published 2024

Operational cost and wind power integration capacities of the integrated heat and power dispatch (IHPD) system under different heating regulation modes and time steps

Xuexiang Zhang, Jinfu Zheng, Hui Zhu [...]

Indoor and Built Environment

Search results