Sage Journals: Discover world-class research

Retricted access

Research article

First published 2001-1

Interfacial instabilities in multimaterial co-injection mouldings Part 1 – Background and initial experiments

V. Goodship, K. Kirwan

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2003-3

Interfacial instabilities in multimaterial co-injection mouldings: Part 2 - Interfacial mixing in transparent mouldings

V. Goodship, K. Kirwan, T. C. Goodhead [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2008-11

Effect of Magnetic Field on the Distribution and Orientation of Magnetic Particles in Co-injection Moulding

E.O. Ogur, M.C. Davis, V. Goodship [...]

Progress in Rubber,Plastics and Recycling Technology

Retricted access

Research article

First published 1999-1

Effects of binder and thermal debinding parameters on residual carbon in injection moulding of Nd(Fe,Co)B powder

S. H. Lee, J. W. Choi, W. Y. Jeung [...]

Powder Metallurgy

Retricted access

Research article

First published 1998-1

Properties of Anisotropic Nd(Fe,Co)B Type Sintered Magnets Produced by Powder Injection Moulding

S. H. Lee, W. Lee, W. Y. Jeung [...]

Powder Metallurgy

Retricted access

Research article

First published 2011-2

Sintering viscosity and sintering stress of nanostructured WC–Co parts prepared by powder injection moulding

A. Simchi

Powder Metallurgy

Retricted access

Research article

First published 2004-1

Microcellular Foaming with Supercritical CO 2 in Injection Moulding

V. Goodship, R.L. Stewart, R. Hansell [...]

Cellular Polymers

Retricted access

Research article

First published 2015-7

Manufacturing and microstructure of porous metal supports for a solid oxide fuel cell

Harald Gschiel, Christian Gierl-Mayer, Herbert Danninger [...]

Powder Metallurgy

Retricted access

Research article

First published 2006-6

Effect of processing conditions on shrinkage and warpage and morphology of injection moulded parts using microcellular injection moulding

A. Kramschuster, R. Cavitt, D. Ermer [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2004-8

Sandwich Injection Moulding of Thermosetting Materials. Part I: Initial Experiments

S. Kiatmanaroj, V. Goodship, G.F. Smith

Progress in Rubber,Plastics and Recycling Technology

Search results