Sage Journals: Discover world-class research

Retricted access

Research article

First published 2024-8

Enhancing the acoustic emission technique using fuzzy artificial bee colony-based deep learning for characterizing selective laser melted AlSi10Mg specimens

Claudia Barile, Caterina Casavola, Dany Katamba Mpoyi [...]

International Journal of Damage Mechanics

Retricted access

Research article

First published 2022-8

Experimental investigation on powder processing and its flow properties of AlSi10Mg alloy with niobium carbide for additive manufacturing

Raj Mohan Radhakrishnan, Venkatraman Ramamoorthi, Raghuraman Srinivasan

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-4

Variations in microstructure and mechanical properties of selective laser melted AlSi10Mg alloy with different heat treatments

Changsheng Lv, Yuhui Zhang, Liquan Wang

Materials Science and Technology

Retricted access

Research article

First published 2025-10

The influence of hybrid rate on the microstructure and mechanical properties of AlSi10Mg composites fabricated via SLM

Halil Ibrahim Kurt, Dilan Demir, Serengül Avseren [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2026-3

Oscillating laser welding of SLM-deposited AlSi10Mg sheets with filler wire: Pores,microstructure and mechanical performance

Zhitao Ping, Changle Li, Junchong Zhang [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2020-5

Design and characterization of trabecular structures for an anti-icing sandwich panel produced by additive manufacturing

Carlo Giovanni Ferro, Sara Varetti, Paolo Maggiore [...]

Journal of Sandwich Structures & Materials

Retricted access

Research article

First published 2021-10

Fabrication defects and limitations of AlSi10Mg lattice structures manufactured by selective laser melting

Enrico Ossola, Andrew A Shapiro, Andre Pate [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2023-7

Aging temperature effects on microstructure and mechanical properties for additively manufactured AlSi10Mg

Liang Yaru, Ma Tiejun, Jin Tounan [...]

Materials Science and Technology

Retricted access

Research article

First published 2026

Investigation of the effect of simultaneous production on porosity in laser powder bed fusion

İnayet Burcu Toprak, Nafel Dogdu

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2013-3

Effect of reinforcement on wear behaviour of aluminium hybrid composites

N Radhika, R Subramanian

Tribology - Materials,Surfaces & Interfaces

Search results