Search results: Sage Journals

Restricted accessResearch articleFirst published June, 2024

Measurement and analysis of radial force,radial torque and surface integrity in micro-drilling of an Al7075-T6 alloy

Shashank Shukla, Rahul Jain, Soumya Gangopadhyay

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published November, 2023

Characterization of nanocomposite tetrahedral amorphous carbon coated drill bits for improved drilled-hole quality in carbon fiber-reinforced polymer/Al7075-T6 stacks

Joy Mathavan Jebaratnam, Muhammad Hafiz Hassan, Abdus Samad Mahmud [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published July, 2024

Empirical investigation on controlled porosity level and dry sliding wear behavior of Al7075-(T6) doped with SiC+MoS 2 based hybrid composites via advanced vacuum-assisted stir casting

Nikhilesh Singh, Deepika Deepika

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published December, 2025

Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process

Ranjeet Kumar Singh, Ramesh Chandra Singh

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published June, 2017

Fretting fatigue life investigation of AL7075-T6 alloy coated by multilayer thin solid films of TiCr/TiN/CrN and Ti/Cr/TiN/Cr/CrN/TiCrN

E Zalnezhad, G Faraji

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published July, 2018

Developing a new experimental set up to study fretting fatigue behavior under cyclic contact loading

F Abbasi, GH Majzoobi, MM Barjesteh

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published December, 2025

Morphological and mechanical behavior of novel Al7075 (T6) + 3.5% SiC + 0.3% CR + 5.5% MoS 2 -based green hybrid composite: An experimental analysis and optimization via TOPSIS

Nikhilesh Singh, Deepika

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Restricted accessResearch articleFirst published 2026

Applying ultrasonic vibrations to improve surface quality of ultrasonically burnished Al7075-T6

Mohammadreza Khosrojerdi, Mohammad Reza Razfar, Rasul Fesharakifard [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published April, 2023

Turning of Al 7075-T6 aerospace alloy under different sustainable metalworking fluid strategies by coated carbide tools

Jasjeevan Singh, Simranpreet Singh Gill

Surface Engineering

Restricted accessResearch articleFirst published 2025

Impact of machining parameters on surface roughness and machining forces in Al7075 turning with minimum quantity lubrication and cold fluid

Abbasali Bagheri, Vahid Abedini, Alireza Hajialimohamadi

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Restricted accessResearch articleFirst published June, 2024

Measurement and analysis of radial force,radial torque and surface integrity in micro-drilling of an Al7075-T6 alloy

Shashank Shukla, Rahul Jain, Soumya Gangopadhyay

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published November, 2023

Characterization of nanocomposite tetrahedral amorphous carbon coated drill bits for improved drilled-hole quality in carbon fiber-reinforced polymer/Al7075-T6 stacks

Joy Mathavan Jebaratnam, Muhammad Hafiz Hassan, Abdus Samad Mahmud [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published July, 2024

Empirical investigation on controlled porosity level and dry sliding wear behavior of Al7075-(T6) doped with SiC+MoS 2 based hybrid composites via advanced vacuum-assisted stir casting

Nikhilesh Singh, Deepika Deepika

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published December, 2025

Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process

Ranjeet Kumar Singh, Ramesh Chandra Singh

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published June, 2017

Fretting fatigue life investigation of AL7075-T6 alloy coated by multilayer thin solid films of TiCr/TiN/CrN and Ti/Cr/TiN/Cr/CrN/TiCrN

E Zalnezhad, G Faraji

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published July, 2018

Developing a new experimental set up to study fretting fatigue behavior under cyclic contact loading

F Abbasi, GH Majzoobi, MM Barjesteh

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published December, 2025

Morphological and mechanical behavior of novel Al7075 (T6) + 3.5% SiC + 0.3% CR + 5.5% MoS 2 -based green hybrid composite: An experimental analysis and optimization via TOPSIS

Nikhilesh Singh, Deepika

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Restricted accessResearch articleFirst published 2026

Applying ultrasonic vibrations to improve surface quality of ultrasonically burnished Al7075-T6

Mohammadreza Khosrojerdi, Mohammad Reza Razfar, Rasul Fesharakifard [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published April, 2023

Turning of Al 7075-T6 aerospace alloy under different sustainable metalworking fluid strategies by coated carbide tools

Jasjeevan Singh, Simranpreet Singh Gill

Surface Engineering

Restricted accessResearch articleFirst published 2025

Impact of machining parameters on surface roughness and machining forces in Al7075 turning with minimum quantity lubrication and cold fluid

Abbasali Bagheri, Vahid Abedini, Alireza Hajialimohamadi

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering