Sage Journals: Discover world-class research

Retricted access

Review article

First published 2024-9

Influence of 2D solid lubricants on mechanical and tribological behaviour of Al 7XXX series metal matrix composites: A comprehensive review

Sudheer Reddy Beyanagari, Arulvel Sivalingam, Jayakrishna Kandasamy [...]

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2009-12

Effects of cold and hot densification on the mechanical properties of a 7XXX series powder metallurgy alloy

I. A. MacAskill, A. D. P. LaDepha, J. H. Milligan [...]

Powder Metallurgy

Retricted access

Review article

First published 2025

A review on fabrication and mechanical characterization of high-strength 7xxx series aluminum alloys reinforced with ceramic reinforcements

Nikhil Bharat, Rajat Jain, Pulcharu Subhash Chandra Bose [...]

Proceedings of the Institution of Mechanical Engineers,Part N: Journal of Nanomaterials,Nanoengineering and Nanosystems

Retricted access

Research article

First published 2005-4

Relationships between weld parameters,hardness distribution and temperature history in alloy 7050 friction stir welds

A. P. Reynolds, W. Tang, Z. Khandkar [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2009-5

Effect of initial base metal temper on mechanical properties in AA7050 friction stir welds

J. Yan, A. P. Reynolds

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2025-4

Investigation of preparation and properties of Al–Zn–Mg–Cu alloy by metal injection moulding

Lingling Chang, Mao Wu, Lin Zhang [...]

Powder Metallurgy

Retricted access

Research article

First published 1986-1

Properties of Particles Produced by Different Rapid Solidification Techniques

J. Duszczyk, P. Jongenburger

Powder Metallurgy

Retricted access

Research article

First published 2022-10

Laser melting deposition of aluminium 7050 alloy: Heat treatment,microstructure and mechanical properties

Jianan Li, Hongjin Zhao, Shenghua Deng [...]

Materials Science and Technology

Retricted access

Research article

First published 2015-8

Effect of filler metal and post-weld friction stir processing on stress corrosion cracking susceptibility of Al–Zn–Mg arc welds

T. E. Borchers, A. Seid, S. S. Babu [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2010-2

Modelling dissolution of low melting point phases during the homogenisation of AA7020 aluminium alloy

A. R. Eivani, H. Ahmed, J. Zhou [...]

Materials Science and Technology

Search results